PERLESMITH PSLFK1 Full Motion TV Wall Mount
A sturdy budget full motion mount for mid to large TVs; plan the stud layout first.
The short version
- Rooms where the TV needs to angle toward a couch and a dining table
- Corner installs where the TV has to pull out and swing
- Owners of 40 to 70 inch TVs within the 132 lb limit
- Your wall has no studs or solid masonry where you want the TV
- Your TV is larger or heavier than the listed range
- You only need a flat, fixed mount, which sits closer to the wall and costs less
What owners like
- Sturdy steel build for the price
- Smooth, easy arm motion when repositioning the TV
- Dual arm design helps limit sag at full extension
Common complaints
- Needs a stud finder and careful layout, since it must go into studs or solid masonry
- Listings disagree on the supported TV size range, which can confuse buyers
Based on PERLESMITH's US and Canada product pages, the Amazon listing, and ScreenRant's TV wall mount roundup. Independent owner feedback read for this exact model was thin..
Research scores
Scored from the maker's specs and what owners report. Drew's own notes and photos will refine these.
Ownership
Drew's hands-on notes for this product are on the way. Long-term updates will be added to this timeline.
What it does
A steel dual arm TV wall mount that tilts, swivels and pulls out up to about 16 inches, rated for TVs up to 132 lb with VESA patterns up to 600x400 mm.
- Dual articulating arms that hold the TV out from the wall and let it swing toward different seats
- Folds to 2.8 inches from the wall when not extended
- Post-install leveling of plus or minus 3 degrees to correct a slightly crooked install
- Maker says the mount was tested with up to four times its rated weight
- Fits most VESA patterns from 200x100 mm up to 600x400 mm
A sensible budget pick for anyone who wants to angle a mid to large TV toward different seats or pull it out from a corner. It carries a high weight rating and a wide VESA range for the money, and the maker says it was tested at four times its rated load. Buyers with very large or heavy sets, or those who want the longest reach, should look at a bigger mount.
How it compares
Specs
- Model
- PSLFK1 (current Amazon listing: PSLFK1-24)
- TV size
- 37 to 70 inches on the Amazon listing; the maker's spec table says 37 to 75 inches
- Max load
- 132 lb (60 kg)
- VESA
- 200x100 mm to 600x400 mm
- Extension
- 2.8 inches from the wall when folded, up to about 16 inches out
- Tilt / swivel / level
- +5 to -15 degrees tilt, plus or minus 45 degrees swivel, plus or minus 3 degrees leveling
- Stud spacing
- 16, 18 or 24 inch wood studs on the PSLFK1-24 version
- Wall plate
- 17.32 x 8.66 inches
- Material
- Steel
- Warranty
- 5-year limited (maker's Canada site)
Worth knowing
- Maker lists wood studs, concrete and block walls as supported surfaces
- Do not exceed the 132 lb (60 kg) rated load
Questions
What size TV fits the PERLESMITH PSLFK1?
The Amazon listing says 37 to 70 inches; the maker's spec table says 37 to 75 inches. Check the VESA pattern and weight, which must be within 600x400 mm and 132 lb.
How far does the PSLFK1 extend from the wall?
From 2.8 inches folded to about 16 inches fully extended.
Can the PSLFK1 go on drywall alone?
The maker lists wood studs, concrete and block walls as mounting surfaces, so it should be anchored into studs or solid masonry.
What stud spacing does it fit?
The PSLFK1-24 version fits 16, 18 or 24 inch wood stud spacing.
What warranty does PERLESMITH offer?
The maker's Canada site lists a 5-year limited warranty.
Sources
- PERLESMITH: Full motion TV wall mount for 37 to 70 inch TVs
- PERLESMITH Canada: Full-motion TV wall mount for 37 to 75 inch TVs
- Amazon: PERLESMITH Full Motion TV Wall Mount PSLFK1-24
- ScreenRant: Best TV wall mounts
Researched 2026-10-02. We bought this product; our page is built from the maker's details and what owners report across reviews and forums. We never copy Amazon customer reviews.
