Decor Grates SPH410-NKL Scroll Floor Register, 4x10, Brushed Nickel
A drop in decorative 4 x 10 register that looks better than stock, with thin durability details.
We bought Accord AMFRSNV410 Victorian Floor Register, 4-Inch x 10-Inch (Duct Opening), Satin Nickel. It's no longer documented anywhere, so this page reviews the closest well-covered match. It is a decorative scroll pattern steel floor register for the same 4 x 10 inch opening in a matching nickel finish, with readable maker specs.
The short version
- Homes with 4 x 10 inch floor ducts and a nickel or chrome decor scheme
- Replacing worn or plain registers
- Your duct opening is not 4 x 10 inches; measure the hole, not the old faceplate
- The vent sits in a heavy traffic path and you want a cast metal register
What owners like
- Dresses up a plain floor vent at low cost
- Fits standard 4 x 10 openings
Common complaints
- Damper box material and load rating are not stated
- Warranty is limited to 12 months
Based on No owner feedback could be read for this register. Themes come from the Amazon listing, the Decor Grates product page and a reseller's description..
Research scores
Scored from the maker's specs and what owners report. Drew's own notes and photos will refine these.
Ownership
Drew's hands-on notes for this product are on the way. Long-term updates will be added to this timeline.
What it does
A decorative steel floor register with a scroll pattern and brushed nickel finish that drops into a 4 x 10 inch duct opening, with an adjustable damper; reviewed here in place of the Accord Victorian satin nickel register it closely matches.
- Scroll pattern faceplate in a brushed nickel finish
- Damper box for adjusting or closing airflow
- Drops into the existing floor opening
- Also sold in 4 and 8 packs, and in antique brass, bright brass and rubbed bronze
A good swap if you want a 4 x 10 floor vent to look like decor rather than plain stamped metal, and you are fine with a simple drop in fit. The trade-offs are that the maker does not say what the damper box is made of and offers only a 12 month warranty.
How it compares
Specs
- Duct opening
- 4 x 10 in (inside dimensions)
- Faceplate
- 5 1/2 x 11 1/2 in (outside dimensions)
- Material
- Steel, about 2 mm thick per a reseller
- Finish
- Brushed nickel, plated
- Design
- Scroll, Classic Collection
- Damper
- Adjustable damper box included, described as rust proof
- Warranty
- Limited 12 months
Questions
What size floor register do I need?
Measure the duct opening in the floor. This one fits a 4 x 10 inch opening and its faceplate is 5 1/2 x 11 1/2 inches.
Does it have a damper?
Yes, it comes with an adjustable damper box.
How do you install it?
It drops into the existing opening.
What finishes does it come in?
Brushed nickel, antique brass, bright brass and rubbed bronze are listed for this design.
Sources
- Amazon.com: Decor Grates SPH410-NKL Scroll Floor Register, 4x10, Brushed Nickel Finish
- Decor Grates: 4x10 Decor Steel Floor Register, Brushed Nickel
- H and S Mobile Home Supplies: Decor Grates 4 x 10 Brushed Satin Nickel Floor Register SPH410-NKL
Researched 2026-10-02. We bought this product; our page is built from the maker's details and what owners report across reviews and forums. We never copy Amazon customer reviews.