Fosmon Single Gang Brush Wall Plate with Low Voltage Mounting Bracket

A tidy, simple way to pass a few low voltage cables through drywall.

We bought Wi4You Brush Wall Plate, White Deco Bristle Single Gang with Mounting Bracket for Low Voltage Cable Pass Through (2 Set). It's no longer documented anywhere, so this page reviews the closest well-covered match. Fosmon sells the same plate and bracket pairing from a known brand with a readable maker page, so it is the closest well documented match.

The short version

Buy it if
  • Anyone wall mounting a TV who wants the cables hidden inside the wall
  • Home office or media setups running a few low voltage cables between rooms
  • Homes with drywall or paneling between 1/4 and 1 inch thick
Skip it if
  • You need to pass a power cord through the wall
  • You plan to run more than a few cables with large plugs through one opening
  • Your wall is thicker than 1 inch

What owners like

  • Gives a clean, finished look where cables enter the wall behind a TV
  • Quick to fit with basic tools
  • Flexible bristles let cables move without rubbing on a raw drywall edge

Common complaints

  • A single gang opening runs out of room with several thick HDMI or Ethernet plugs
  • Cables can snag at the plate when furniture or the TV is moved
  • Wall thickness has to be checked before buying for a flush fit

Based on Fosmon product pages, a pass through wall plate buying guide from Trowbridge Electrical and an AVForums thread on brush plates and cable runs. Themes cover brush plates in general, as little owner discussion of this exact kit was readable..

Research scores

Does the job 7.0 hides a few low voltage cables neatly, but one gang fills up fast
Durability 6.5 UL94 V0 rated ABS and lifetime warranty, though cables can snag at the plate
Ease of install/use 7.0 trace, cut and screw with no box, but wall thickness must be checked
Value 7.5 low cost for a plate and bracket kit from a known brand

Scored from the maker's specs and what owners report. Drew's own notes and photos will refine these.

Ownership

Times bought1
Price range$

Drew's hands-on notes for this product are on the way. Long-term updates will be added to this timeline.

What it does

A white single gang brush wall plate paired with a low voltage mounting bracket, for passing HDMI, coax, speaker and network cables through drywall. This page covers it in place of the Wi4You brush wall plate set, which had too little readable coverage.

  • Brush opening lets cables pass while hiding the hole in the wall
  • Backless bracket mounts in drywall without an electrical box
  • Bracket doubles as the template: trace the inside, cut, then install
  • Plate also fits standard single gang boxes and brackets with the usual screw pattern
  • Made for speaker wire, coax, HDMI and network or phone cable

A sensible pick for hiding the cables behind a wall mounted TV or desk where only a few low voltage cables need to pass through. The bracket takes no electrical box, so install is a trace, cut and screw job, but a single gang opening fills up fast with bulky HDMI plugs, and it must never carry power cords.

How it compares

VCE Brush Wall Plate with Bracket (2 pack)Similar design from another known brand if Fosmon is out of stock$
Cable Matters 2 Pack 1 Gang Brush Wall Plate with BracketWorth a look if you already use Cable Matters cables and want matching parts$
Fosmon 2 Gang Brush Wall Plate with BracketBetter when many cables or bulky connectors need to pass through one opening$

Specs

Type
Single gang decorator brush plate with low voltage mounting bracket
Wall cover size
2.75 x 4.5 x 0.29 in
Brush opening plate
1.3 x 2.6 x 0.43 in
Bracket opening
2.125 x 3.5 in
Wall thickness
1/4 in to 1 in
Material
ABS rated UL94 V0
Warranty
Limited lifetime

Worth knowing

  • Fosmon lists these for low voltage cables only. Do not run power cords through the plate.

Questions

Do brush wall plates need an electrical box?

No. The low voltage bracket clamps into a drywall cutout, so no box is needed for low voltage cable.

Can a power cord go through a brush wall plate?

No. These plates are for low voltage cable only. Mains power needs a proper outlet or a rated in wall power kit.

How big a hole do you cut?

Fosmon lists the bracket opening as 2.125 by 3.5 inches and says to trace the inside of the bracket as the cutting guide.

What wall thickness does the bracket fit?

Fosmon lists 1/4 inch to 1 inch.

Sources

Researched 2026-10-02. We bought this product; our page is built from the maker's details and what owners report across reviews and forums. We never copy Amazon customer reviews.

7.0Fosmon Single Gang Brush Wall Plate with Low Voltage Mounting Bracket Check price